STAINLESS STEEL RODS

Stainless Steel 304 Round Bar is made up of a stainless material that has 18% chromium and 8% nickel in its composition. The material has corrosion resistance and strength properties.

SS 304L Round Bar has high mechanical strength and material strength to withstand in any harsh environments. These bars offer exceptional performance in elevated temperature and pressure applications.

316 stainless steel round bar is an excellent candidate for most processing techniques as well as both indoor and outdoor applications. AISI 316 stainless steel is a non-magnetic high strength material with excellent corrosion resistance. The strength of 316 is slightly stronger than 303 and 304 stainless.

The 316/316L stainless steel bar, rod and wire alloy also offer higher creep, stress to rupture and tensile strength at elevated temperatures, in addition to excellent corrosion resistance and strength properties. 316/L refers to the lower carbon content to allow for greater corrosion protection when welding.

310 stainless steel bar, also known as UNS S31000 and Grade 310, contains the following primary elements: . 25% maximum carbon, 2% maximum manganese, 1.5% maximum silicon, 24% to 26% chromium, 19% to 22% nickel, traces of sulfur and phosphorus, with the balance being iron.

Alloy 317L is a molybdenum containing, low carbon austenitic stainless steel with increased additions of chromium, nickel, and molybdenum for better corrosion resistance and increased resistance to chemical attack for sulfurous, acetic, formic, citric, and tartaric acids.

347 stainless is an austenitic stainless steel offering an excellent resistance to inter-granular corrosion following exposure to temperatures in the chromium carbide precipitation range from 800 to 1500O F.

904L Stainless Steel Round Bar is a high-combination austenitic stainless steel with low carbon content. The evaluation is expected for use under extreme destructive conditions. It has been application demonstrated over numerous years and was initially created to oppose erosion in weaken sulfuric corrosive.

15-5 is a variant of the older 17-4 chromium-nickel-copper precipitation hardening stainless steel. Both alloys exhibit high strength and moderate corrosion resistance. High strength is maintained to approximately 600 degrees F.

Stainless Steel 316 Round Bar is made up of a stainless steel that is austenitic. The material has chromium, nickel and molybdenum in its composition. The molybdenum content makes the Stainless Steel 316 Round Bar products to be more corrosion resistant than the 304 grade of stainless steel.

Alloy 317L (UNS S31703) is a lowcarbon corrosion resistant austenitic chromium-nickel-molybdenum stainless steel. The high levels of these elements assure the alloy has superior chloride pitting and general corrosion resistance to the conventional 304/304L and 316/316L grades.

Stainless Steel 316L Bars (SS 316L Bars) are austenitic steels by means of having higher molybdenum or molybdenum and more nitrogen content that offer even greater resistance to pitting, general corrosion and crevice corrosion.

What is 446 Stainless Steel Round Bar ? 446 is a high chromium ferritic heat resistant alloy with excellent resistance to oxidation, sulfidation and other forms of hot corrosion. This grade is most commonly used between 1500 – 2100°F, although its elevated temperature strength is quite low.

Stainless Steel 410 Bar is a kind of bar which is also made by us and we specialize in making this martensitic grade steel which is containing chromium. They offer both wears as well as corrosion resistance. Stainless Steel 410 Bar is also resistant to corrosion to some chemical, water, air and food and mild acid.

This Stainless Steel 316H Bar is actually austenitic stainless steel which bears molybdenum as one of its constituents. The content of nickel and molybdenum in this grade are higher due to which is shows increased resistance to corrosion.

Stainless Round Bar/Rod 440C is normally used for industrial, machine, and tool applications. 440C stainless provides maximum hardness and strength after heat treatment.

Stainless Steel 303 Round Bar is a non-magnetic, austenitic stainless steel that is not hardenable by heat treatment. It is the free machining modification of the basic 18% Chromium / 8% Nickel Stainless Steel.

304l stainless steel welding rod Standards. astm a276 type 304l Hollow Bar size.
...

The “L” in 304L can be interpreted as meaning extra-low carbon. This difference of 0.05% carbon content produces a slight, but marked, difference in the performances of the two alloys.

Stainless-steel bar or rod is used in various applications and is widely used in the construction industry due to its durability and resistance to corrosion and rust. ... 303 - has good corrosion resistance, free machining, not suitable for welding or forming.

Stainless Steel 321 Bar is magnetic and non-magnetic in nature. These bars have excellent machinability and formability that is the ideal option for engineering applications. It has low welding costs or easily welded by conventional techniques. It has good thermal stability without any deformations.

Stainless Steel 316 Round Bar is made up of a stainless steel that is austenitic. The material has chromium, nickel and molybdenum in its composition. The molybdenum content makes the Stainless Steel 316 Round Bar products to be more corrosion resistant than the 304 grade of stainless steel.

Common applications of aluminum round bar include supports, trim, shaft, braces, pins, and dowels. Brass round bars are used when strength, electrical conductivity, corrosion resistance, and spark resistance are important. Brass is easy to machine and has an attractive sheen when polished.