Kiah Metallurgical Indian Exporters

A stainless steel 304 grade grease nipple, also known as a grease fitting or grease zerk, is a mechanical component used in lubrication systems to allow grease to be injected into machinery and equipment. These fittings help reduce friction and wear, ensuring smooth operation and prolonging the lifespan of moving parts.

A stainless steel 304 grade grease nipple, also known as a grease fitting or grease zerk, is a mechanical component used in lubrication systems to allow grease to be injected into machinery and equipment. These fittings help reduce friction and wear, ensuring smooth operation and prolonging the lifespan of moving parts.

Super Duplex 2507 reducer is a type of pipe fitting used to connect pipes of different diameters, facilitating the flow of fluids while maintaining the integrity of the piping system. Super Duplex 2507 is a high-performance alloy known for its exceptional strength and corrosion resistance, particularly in harsh environments.

Titanium Grade 24 (Ti-6Al-4V ELI) reducer is a fitting used in piping systems to connect pipes of different diameters, allowing for a smooth transition from a larger pipe to a smaller pipe. This type of reducer is particularly popular in applications where lightweight, high strength, and corrosion resistance are essential.

A Titanium Grade 3 reducer is a type of pipe fitting made from Grade 3 titanium alloy, which is commonly used in various industrial applications, especially where corrosion resistance and high strength are required. A reducer is designed to connect two pipes of different diameters, allowing for a smooth transition between the sizes, which is crucial in fluid or gas flow systems.

A cast iron reducing tee is a type of plumbing fitting used to connect three sections of pipe, where one of the outlets has a smaller diameter than the inlet pipes. This fitting is essential for branching off a main pipeline to accommodate different pipe sizes, enabling efficient fluid or gas distribution in various piping systems.

A 316 stainless steel grease nipple (also known as a grease fitting or grease zerk) is a small component used in machinery and mechanical assemblies to facilitate the lubrication of moving parts. It allows for the easy injection of grease into bearings, joints, and other components that require regular lubrication.

Cast iron pipe tees are plumbing fittings used to connect three sections of pipe, allowing for a change in direction and the integration of branch lines in a piping system. The "tee" shape of these fittings resembles the letter “T,” where one end connects to the main line, while the other end branches off in a perpendicular direction.

A Titanium Grade 12 Reducer is a type of pipe fitting used to connect pipes of different diameters, allowing for a smooth transition from a larger diameter pipe to a smaller diameter. Titanium Grade 12 (UNS R53400) is an alloy that combines the benefits of titanium with the enhanced corrosion resistance provided by molybdenum and nickel. It is widely used in industries requiring materials with high strength, lightweight, and excellent resistance to corrosion, especially in demanding environments such as chemical processing, marine, and aerospace.

A copper reducing tee is a type of pipe fitting made from copper that allows for the connection of pipes of different diameters in a T-shaped configuration. It is used in plumbing and HVAC systems to join a larger pipe to a smaller one, enabling a change in pipe size while maintaining the flow of liquid or gas through the system.

A stainless steel welded pipe tee is a type of pipe fitting that allows for the connection of three sections of pipe, providing a branch connection in a piping system. This fitting is essential for directing the flow of liquids and gases in various applications, including plumbing, chemical processing, oil and gas, and HVAC systems.

A cross pipe tee, often referred to simply as a "cross," is a type of piping fitting used to distribute flow among three or more pipe segments. It is designed to connect four pipes, allowing fluid to flow through the intersection of three lines, typically at right angles. Crosses are often used in various applications, including plumbing, water supply, oil and gas distribution, and HVAC systems.

A 304 stainless steel elbow is a type of fitting used in piping systems to change the direction of the flow of fluids or gases. Made from 304 stainless steel, which is an austenitic stainless steel alloy, this type of elbow is known for its excellent corrosion resistance, high ductility, and good weldability.

Monel K500 is an alloy consisting primarily of nickel (around 63%) and copper (around 29%), along with small amounts of aluminum, titanium, iron, and manganese. It is known for its excellent corrosion resistance, high strength, and good weldability, making it suitable for various applications in harsh environments such as marine engineering, oil and gas industries, and chemical processing.

Hastelloy C-22 is a high-performance nickel-based alloy known for its excellent resistance to corrosion in a wide range of aggressive environments. It is particularly effective against pitting, crevice corrosion, and stress corrosion cracking. These properties make Hastelloy C-22 an ideal choice for various applications in industries such as chemical processing, pharmaceutical manufacturing, oil and gas, and wastewater management.

Monel pipe fittings are made from a nickel-copper alloy called Monel, which is known for its excellent corrosion resistance, high strength, and versatility. Monel is often used in applications involving tough conditions, such as high temperatures, pressures, and aggressive environments, like marine applications or chemical processing.

Super Duplex 2507 is a highly corrosion-resistant, stainless steel grade known for its excellent mechanical properties, particularly in challenging environments. It is a combination of austenitic and ferritic stainless steel, designed to operate in extremely corrosive conditions, particularly in chloride environments. The alloy is characterized by its high chromium (around 25%) and molybdenum (around 4%) content, which contributes to its exceptional resistance to pitting, crevice corrosion, and stress corrosion cracking.

UNS S31803 is a specification for a duplex stainless steel, which is a category of stainless steel that contains a mix of austenitic and ferritic structures. Specifically, this grade is a type of duplex stainless steel that is known for its high strength, good corrosion resistance, and ability to be used in a wide range of temperatures. The primary alloying elements in S31803 include chromium (around 22%), nickel (around 5-6%), and molybdenum (around 3%), which contribute to its properties.

Stainless Steel 347H is a high carbon version of Stainless Steel 347, which is an austenitic stainless steel that is stabilized with titanium. This grade is especially beneficial in high-temperature applications and environments where corrosion resistance is critical. The addition of titanium helps minimize carbide precipitation during welding and elevated temperature exposure, enhancing its structural integrity.

Stainless Steel 304 is one of the most commonly used stainless steel grades, known for its excellent balance of corrosion resistance, formability, and tensile strength. It is an austenitic stainless steel, which primarily consists of iron, with approximately 18% chromium and 8% nickel. This composition provides Stainless Steel 304 with enhanced resistance to various corrosive environments, especially in low- to moderate-temperature applications.

Duplex pipe fittings are made from duplex stainless steel, which is a type of alloy that combines both austenitic and ferritic stainless steel microstructures. This dual-phase microstructure gives duplex stainless steel its unique properties, including high strength, excellent corrosion resistance, and improved resistance to stress corrosion cracking.

UNS S32750, commonly known as Super Duplex Stainless Steel, is a highly corrosion-resistant alloy that is widely used in industries such as oil and gas, petrochemical, and marine applications. Its unique microstructure, which consists of approximately equal parts austenite and ferrite, provides a combination of high strength, exceptional corrosion resistance, and good workability.

Inconel Butt Weld Fittings are specialized components used in piping systems to connect different sections of pipe or to connect piping to other equipment. Inconel is a family of high-performance alloys that are known for their excellent resistance to corrosion and high-temperature strength, making them suitable for demanding environments.

Nickel 200 is a commercially pure nickel alloy, containing about 99.6% nickel along with minimal amounts of copper and iron, along with trace elements. It is known for its excellent corrosion resistance, especially in acidic environments, and is widely used in various industrial applications. The alloy is characterized by its high thermal and electrical conductivity, good mechanical properties, and ability to withstand extreme temperatures.

Hastelloy C276 is a high-performance nickel-molybdenum-chromium alloy known for its excellent corrosion resistance in a wide range of harsh environments, including those with acids and chlorides. This alloy is particularly suitable for applications that require high strength and the ability to resist pitting, crevice corrosion, and stress corrosion cracking.

Hastelloy C276 is a high-performance nickel-molybdenum-chromium alloy that is renowned for its exceptional resistance to a wide range of corrosive environments, particularly against pitting, crevice corrosion, and stress corrosion cracking. Its unique composition provides high strength at elevated temperatures, making it suitable for various applications across different industries.

An Inconel 600 elbow is a pipe fitting made from Inconel 600, a high-performance nickel-chromium alloy. Inconel 600 is renowned for its excellent resistance to oxidation, carburization, and corrosion at elevated temperatures, making it an ideal material for use in high-temperature, high-stress environments. When shaped into an elbow, it serves as a critical component in piping systems, facilitating changes in the direction of flow while maintaining the material's integrity in extreme conditions.

An Inconel 601 elbow is a pipe fitting made from Inconel 601, a high-performance nickel-chromium alloy known for its excellent resistance to oxidation, carburization, and other high-temperature corrosion. Inconel 601 is particularly suited for applications that involve high temperatures, thermal cycling, and exposure to aggressive chemicals or gases. The elbow serves as a key component in piping systems, allowing the direction of flow to change while maintaining the integrity and performance of the system under extreme conditions.

Inconel Forged Fittings are high-strength, high-performance components made from Inconel alloys, which are nickel-based superalloys known for their excellent resistance to oxidation, high-temperature strength, and corrosion resistance. Forged fittings are commonly used in industries where high-performance materials are required, such as in aerospace, chemical processing, power generation, and oil and gas. These fittings are manufactured through a forging process, which improves the material’s mechanical properties, such as strength, toughness, and fatigue resistance.

A Titanium Grade 5 reducer is a type of pipe fitting used to connect two different pipe sizes while transitioning the diameter from a larger pipe to a smaller one. Titanium Grade 5, also known as Ti-6Al-4V, is an alloy of titanium composed of approximately 90% titanium, 6% aluminum, and 4% vanadium. It is one of the most commonly used titanium alloys due to its excellent combination of high strength, low weight, and corrosion resistance.

Titanium Grade 12 Elbow is a fitting used in piping systems to change the direction of the flow by 90 degrees, made from Titanium Grade 12 (also known as Ti-0.3Mo-0.8Ni). This particular titanium alloy is well-regarded for its strength, corrosion resistance, and excellent weldability, making it suitable for various demanding applications.

A Titanium Grade 2 elbow is a fitting used in piping systems, designed to change the direction of fluid flow, typically by 90 degrees. Titanium Grade 2 is a commercially pure titanium, known for its excellent corrosion resistance, high strength-to-weight ratio, and good weldability, making it an ideal choice for various demanding applications.