Kiah Metallurgical Indian Exporters

Stainless steel (SS) ball valves are widely used in various industries for regulating the flow of liquids and gases. They are known for their durability, corrosion resistance, and excellent sealing capabilities.

A sluice valve is ideal for use when the liquid flow must be cut off; it cannot be used as a flow regulator. Sluice valve finds application in wastewater treatment plants and across industries in process plants to control slurries. During operations, these valves are either fully opened or fully closed.

A gate valve is generally used to completely shut off fluid flow or, in the fully open position, provide full flow in a pipeline. Thus it is used either in the fully closed or fully open positions. A gate valve consists of a valve body, seat and disc, a spindle, gland, and a wheel for operating the valve.

Foot valves are specialized check valves used in pumping systems, primarily to prevent backflow and maintain the priming of pumps. They are typically installed at the bottom of a suction pipe, submerged in the fluid being pumped. 

Pinch valves facilitate opening and closing the flow of liquid through a tube without any contact between the liquid and the valve itself. The tube is pinched between a fixed and a moving bar (pinch elements), as these are closed together the tube is pinched closed until flow is shut off.

Among the primary devices utilized for preventing overpressure and potential catastrophic failures are safety valves. These valves are designed to release a controlled volume of fluid from within a system when a predetermined maximum pressure is reached, thereby reducing excess pressure in a safe manner.

Air and vacuum valves discharge large quantities of air from non-pressurised pipes and are used mainly when filling a line. Air and vacuum valves also make it possible to admit large quantities of air when lines are drained and when the pressure drops suddenly.

Diaphragm valves, utilize an elastomeric diaphragm that interacts with a seat to regulate or completely stop the fluid flow. The diaphragm's flexibility allows it to move up or down, adjusting the fluid flow rate accordingly, and ensures a tight seal when closed against its seat.

A needle valve is a type of valve with a small port and a threaded, needle-shaped plunger. It allows precise regulation of flow, although it is generally only capable of relatively low flow rates. Giffard steam water injector (B-needle valve). A needle valve.

The Jacketed Ball Valve has very well design to help the high temperature steam or oil flow over the valve ball & body parts to keep the media liquid. This applies especially to media like bitumen and liquid sulfur. In addition, the efficient flow of media is ensured through the elimination of pockets.

Plug valves are valves with cylindrical or conically tapered "plugs" which can be rotated inside the valve body to control flow through the valve. The plugs in plug valves have one or more hollow passageways going sideways through the plug, so that fluid can flow through the plug when the valve is open.

Valve manifolds fulfill critical operational functions, including: Blocking a connection to the process. Equalizing pressure between the two ports of the measuring device. Bleeding the segment between the instrument and the process.

Brass ball valves are commonly used in plumbing, heating, and industrial applications for controlling the flow of liquids and gases. Known for their durability and corrosion resistance, brass ball valves are a reliable choice for various environments. 

Flanged gate valves are widely used in industrial and commercial applications for controlling the flow of fluids in pipelines. They are characterized by their robust construction and ability to provide a tight seal when closed, making them suitable for on/off service rather than throttling applications

Forbes Marshall Piston Valves are the best technical fit to cater to a variety of fluid isolation applications in the industrial sector. They find application in a variety of media in process and utilities like saturated steam, superheated steam, heat transfer fluids, nitrogen and more.

Male gun metal gate valves are specialized valves designed for use in piping systems, typically featuring a male thread connection that allows them to be easily installed into female threaded fittings. These valves are made from gun metal, a copper alloy known for its durability and corrosion resistance

Pressure relief valves (safety relief valves) are designed to open at a preset pressure and discharge fluid until pressure drops to acceptable levels. The development of the safety relief valve has an interesting history.

Double flanged butterfly valves are widely used in industrial applications for controlling the flow of fluids in pipelines. Their design and construction make them suitable for various media, including water, air, and other fluids, under different pressure conditions. 

Water check valves are essential devices used in piping systems to prevent the backflow of water. They ensure that water flows in one direction, helping to protect pumps and other equipment from damage caused by reverse flow.

Disc Check Valves are recommended after traps discharging into closed systems to guarantee Non return or no reverse flow. These check valves can be mounted between pipe flanges in any direction. DCVs feature a compact and rugged stainless steel design and are suitable for any process liquid & gas, apart from steam.

A swing check valve is mounted with a disc that swings on a hinge or shaft. The disc swings off the seat to allow forward flow and when the flow is stopped, the disc swings back onto the seat to block reverse flow. The weight of the disc and the return flow has an impact on the shut-off characteristics of the valve.

A Stainless Steel Compression Needle Valve is a kind of valve constructed with a small port and a needle shaped threaded plunger. The Needle Valve gets its name from the needle shaped plunger. An advantage of the 1/2 Inch Stainless Steel Needle Valve is that it permits precise regulation of flow.

Stainless steel butterfly valves are widely used in various industries for controlling the flow of fluids. Known for their durability, lightweight design, and ease of operation, these valves are a popular choice for applications involving liquids and gases.

Cast iron sluice valves are essential components in water supply and wastewater systems, primarily used for regulating the flow of fluids. They are designed to provide a tight shut-off and are particularly effective in applications where large volumes of water need to be controlled.

Stainless steel three-piece ball valves are highly versatile and durable valves used in various industrial applications for controlling fluid flow. The "three-piece" design refers to the construction, which consists of three separate parts: the body and two end connections. This design allows for easy maintenance and replacement of components without removing the valve from the piping system.

The carbon steel gate valve is a great solution for high pressure, gas, water, oil, paper/pulp with API 600 & API 602 standards. Carbon steel body material Forged steel body also available. The trim material is SS304, SS316, 13Cr, Stellite 6 etc.

Gate valves are found in a variety of industries, such as underground water or sewage disposal applications. They are also commonly found in irrigation and distribution service lines. Gate valves are suited for high pressures and temperatures, and are also used for low-pressure steam, and non-corrosive gas or oil.

Stainless Steel Wedge Gate Valves are crucial components in many industrial and commercial piping systems. They are designed to allow or block fluid flow in pipelines and are known for their durability, reliability, and resistance to corrosion.

A bronze globe valve is a type of valve commonly used in fluid control applications to regulate the flow of liquids and gases in a piping system. Made primarily of bronze, an alloy of copper and tin (often with the addition of other elements like aluminum or phosphorus), these valves are highly valued for their durability, resistance to corrosion, and excellent mechanical properties.

A cast iron gate valve is a type of valve used to start or stop the flow of fluid in a piping system. It is named for its gate-like mechanism that moves up and down within the valve to open or close the flow path. Cast iron gate valves are widely used because of their durability, resistance to corrosion, and ability to handle high pressures and temperatures.

Audco ball valves are high-performance valves used to control the flow of fluids in various applications. They are known for their reliability, durability, and ease of operation.

High-pressure globe valves are essential components in fluid control systems, particularly in applications where precise flow regulation is required under high-pressure conditions. 

Knife gate valves are specialized valves designed for on/off control of flow in applications where the medium can be abrasive, viscous, or contain solids. They are particularly effective in handling slurries, pulp, and other challenging materials, making them common in industries such as wastewater treatment, mining, and pulp and paper. 

 

Angle Globe Valves are a type of globe valves that are used in varying angles to the pipeline. Most valves are used in perpendicular to the pipe system. The globe valves have a valve body within which a plug is raised and lowered to close and open and opening inside the body structure.

Aluminum butterfly valves are lightweight and corrosion-resistant valves used for regulating the flow of fluids in various applications. Their design and material make them particularly suitable for specific environments where weight and resistance to corrosion are critical.

A butterfly valve is a mechanism that regulates the flow of materials within large pipe diameters by the quarter-turn rotation of a disc. A rod feeds through the center of a disc and this rod is connected to an actuator that controls the motion of the disc.

A globe valve is an instrument used to stop and/or control the flow of fluids in a pipeline. It works by halting the flow of a fluid through a pipe. The name globe comes about due to the valve's cylindrical shape. There are usually two halves of the body within the globe valve that are separated by an internal baffle.

Pressure reducing valves (PRVs) are essential components in fluid control systems, designed to reduce and regulate the pressure of fluids flowing through a system. They ensure that downstream pressure remains within a desired range, protecting equipment and maintaining system efficiency.

Materials include cast steel from DN 50 (50 mm) to DN 300 (300 mm) and 316 Stainless Steel. Great for controlling steam and other media. What is a Globe Valve? A globe valve can be used to not only isolate media but provide some degree of throttling to the line

Pneumatic ball valves are used to control the flow of a media (liquid or gas) by means of a rotating ball with a bore. Pneumatic actuators control ball valves by converting compressed air energy to mechanical motion. The rotating ball is controlled and turned by a pneumatic actuator.