Kiah Metallurgical Indian Exporters

A Stainless Steel Orifice Flange is a specialized type of flange designed for use in flow measurement systems, particularly in orifice plate installations for measuring the flow rate of liquids and gases in pipelines. It is commonly used in conjunction with orifice plates, flow meters, and pressure transmitters to calculate the flow rate based on the pressure differential across the orifice plate. Stainless steel orifice flanges are highly durable and provide excellent resistance to corrosion, making them suitable for a wide range of industrial applications, including oil & gas, chemical processing, and water treatment.

A Weld Socket Flange (often referred to as a Socket Weld Flange) is a type of flange designed to be welded to the outside of a pipe, rather than being inserted into the pipe as with a slip-on flange. The socket refers to the hole in the flange that the pipe fits into, providing a secure fit before welding. This type of flange is commonly used in small-diameter high-pressure systems (typically up to 2 inches) due to its superior ability to withstand high stress and pressure.

Mild Steel Flanges are flanges made from mild steel, a type of low-carbon steel with a carbon content typically between 0.05% and 0.25%. It is known for its excellent weldability, malleability, and relatively low cost, making it a popular choice for a variety of industrial applications where high strength and corrosion resistance are not the primary concerns. Mild steel is often used for non-corrosive environments, low to medium pressure systems, and where the ease of fabrication and cost-effectiveness are key considerations.

Inconel 625 Flanges are flanges made from Inconel 625, a nickel-chromium alloy with outstanding resistance to high-temperature oxidation, corrosion, and stress corrosion cracking. Inconel 625 is known for its excellent strength-to-weight ratio and ability to withstand extreme environments, which makes it ideal for use in highly demanding industries, including aerospace, chemical processing, marine, and power generation.

Inconel 601 Flanges are flanges made from Inconel 601, a nickel-chromium alloy designed to provide excellent oxidation resistance at high temperatures and corrosion resistance in a variety of aggressive environments. Inconel 601 is primarily used in applications where materials are exposed to extreme heat and oxidizing conditions, such as in furnace components, chemical processing, and aerospace applications.

Inconel 825 Flanges are flanges made from Inconel 825, a nickel-based superalloy that offers excellent corrosion resistance, especially in acidic environments. Inconel 825 is known for its ability to withstand oxidizing and reducing environments and has good resistance to sulfide stress cracking, pitting, crevice corrosion, and stress corrosion cracking. This makes it particularly useful in applications exposed to acidic media like sulfuric acid, phosphoric acid, and organic acids, as well as seawater and other corrosive environments.

Inconel 600 flanges are flanges made from Inconel 600, a high-performance nickel-chromium alloy that offers excellent resistance to oxidation, corrosion, and high-temperature environments. This alloy is particularly well-suited for demanding applications where the material needs to withstand elevated temperatures and aggressive environments without compromising its mechanical properties.

Inconel 800 flanges are high-performance components made from Inconel 800, a nickel-iron-chromium alloy known for its excellent resistance to oxidation, carburization, and high-temperature strength. These flanges are essential in piping systems that require a high level of durability and resistance to extreme conditions, such as those found in chemical processing, power generation, furnace construction, and petrochemical industries.

Inconel 600 Flanges are made from a high-performance nickel-chromium alloy (Inconel 600), known for its outstanding resistance to oxidation, carburization, and high-temperature corrosion. This alloy is designed to withstand extreme environments and retain its strength at temperatures up to 2000°F (1093°C). Inconel 600 Flanges are commonly used in industries such as aerospace, chemical processing, nuclear, and power generation, where components are exposed to high temperatures and corrosive environments.

Inconel 601 Flanges are made from a high-performance nickel-chromium alloy (Inconel 601) that provides outstanding resistance to oxidation, carburization, and high-temperature corrosion. This alloy is designed to withstand extreme operating conditions, making it ideal for applications where high-temperature strength and resistance to aggressive environments are critical. With the ability to maintain its mechanical properties at temperatures up to 2200°F (1204°C), Inconel 601 Flanges are commonly used in industries such as chemical processing, aerospace, power generation, and furnace technology.

Stainless Steel Socket Weld Flanges are a type of flange designed for high-pressure and high-temperature piping systems, typically in smaller pipe sizes. They are widely used in industries such as oil & gas, chemical processing, power generation, petrochemical, and marine due to their ability to provide secure, reliable, and strong connections, especially in systems subject to high-pressure conditions.

Stainless Steel Weld Neck Flanges are a type of flange that features a long, tapered neck, which is welded to the pipe or vessel. The weld neck design provides a robust connection that can withstand high-pressure, high-temperature, and dynamic loads, making it suitable for demanding industrial applications. These flanges are commonly used in piping systems where strong, leak-proof connections are essential.

Stainless Steel 304L Flanges are a type of flange made from 304L stainless steel, a low-carbon version of 304 stainless steel. 304L is one of the most widely used grades of stainless steel due to its excellent corrosion resistance, high strength, and versatility. The low carbon content (maximum of 0.03%) in 304L stainless steel enhances its weldability and minimizes the risk of carbide precipitation during welding, making it ideal for applications that involve high temperatures or require welded components.

Stainless Steel 310 Flanges are flanges made from Stainless Steel 310, an austenitic stainless steel alloy that is known for its excellent high-temperature resistance, oxidation resistance, and good corrosion resistance. Stainless Steel 310 is composed primarily of chromium and nickel, with higher levels of these elements compared to other stainless steels, which enhances its ability to withstand high-temperature environments while maintaining its strength.

Stainless Steel 316 Welded Flanges are flanges made from Stainless Steel 316 (austenitic stainless steel), which is known for its excellent corrosion resistance, particularly against chlorides, and its superior mechanical properties at both room and elevated temperatures. 316 stainless steel is alloyed with molybdenum (typically 2-3% Mo) to enhance its resistance to corrosion, especially in marine and chemical environments. Welded flanges are designed to be welded directly to pipes, providing a strong, leak-proof connection for high-pressure and high-temperature applications.

Stainless Steel 317 Flanges are flanges made from Stainless Steel 317, a highly corrosion-resistant austenitic stainless steel alloy. It is particularly known for its resistance to corrosion in chloride-rich environments and higher levels of sulfuric acid, making it a popular choice for chemical processing, marine, and industrial applications where standard stainless steel may not provide sufficient protection.

Stainless Steel 321 Flanges are flanges made from Grade 321 stainless steel, an austenitic steel alloy that contains titanium as a stabilizing element. Grade 321 is highly resistant to intergranular corrosion, making it ideal for high-temperature applications where sensitization (the formation of chromium carbides at grain boundaries) might occur, which is common in other stainless steels like 304. This resistance to sensitization and its good oxidation resistance make 321 flanges suitable for use in high-temperature environments.

Stainless Steel 347 Flanges are flanges made from Stainless Steel 347, an austenitic stainless steel alloy that contains niobium (Nb) and tantalum (Ta), which help to stabilize the material against sensitization and intergranular corrosion at elevated temperatures. This makes 347 stainless steel ideal for high-temperature applications such as heat exchangers, furnaces, boilers, and in industries where welded components are exposed to high temperatures for extended periods.

Stainless Steel 904L Flanges are high-performance flanges made from 904L stainless steel, a super-austenitic stainless steel that is known for its exceptional corrosion resistance, especially in highly corrosive environments. 904L contains higher levels of chromium, nickel, molybdenum, and copper, which provide enhanced resistance to corrosion, particularly in chloride-rich and acidic environments.

Stainless Steel Blind Flanges are specialized flanges used to seal the end of a pipeline or vessel, effectively blocking the flow of fluids, gases, or other materials. These flanges are called "blind" because they have no central hole, unlike other types of flanges that allow for the passage of materials. They are used when there is a need to close or seal off a pipeline, valve, or other equipment temporarily or permanently.

Stainless Steel F304 Flanges are flanges made from Grade 304 stainless steel, which is one of the most commonly used austenitic stainless steels. Known for its excellent corrosion resistance, good weldability, and ease of fabrication, 304 stainless steel is often used in general-purpose applications where both strength and resistance to corrosion are required. F304 refers to forged 304 stainless steel, meaning the material has been shaped using a forging process, which results in enhanced mechanical properties like strength and toughness.

Stainless Steel Forged Flanges are flanges made from forged stainless steel, which undergoes a process where the steel is heated and shaped using pressure or hammering to achieve a high-density, durable material. Forging enhances the mechanical properties of stainless steel, making forged flanges stronger and more reliable than those made by casting or other methods. This makes them especially suitable for high-pressure, high-temperature, and critical applications where strength, durability, and reliability are paramount.

Stainless Steel Screwed Threaded Flanges (also known as Threaded Flanges) are a type of flange that is designed to connect pipes, valves, and other equipment using threads instead of welding. These flanges have internal threads, which match with the external threads of a pipe or other components, making them ideal for situations where welding is not an option or where disassembly is needed for maintenance or inspection.

Stainless Steel Spectacle Blind Flange is a specialized type of flange used primarily to isolate a section of a pipeline or system from the flow of materials. This flange consists of a pair of discs (one solid, one perforated) that are bolted together in the pipeline. The solid disc is used to block off flow, while the perforated disc allows for the flow when required. The two discs are connected by a bridge or arm, which gives the flange its characteristic "spectacle" appearance.

Stainless Steel 316 Flanges are high-quality flanges made from 316 stainless steel, a molybdenum-alloyed austenitic stainless steel that provides superior corrosion resistance compared to 304 stainless steel, particularly in chloride-rich environments. Due to its excellent resistance to corrosion, heat, and oxidation, 316 stainless steel flanges are widely used in industries such as chemical processing, marine, pharmaceutical, and food processing.

A 12-inch SS Blind Flange is a type of flange used to seal the end of a 12-inch diameter pipe or vessel. The SS in the description refers to stainless steel, which is commonly used for these flanges due to its excellent corrosion resistance, strength, and durability in a wide range of applications. The blind flange is a solid disc that does not have a central hole and is used to close off a pipeline or system temporarily or permanently.

Raised Face Weld Neck Flanges are a type of flange commonly used in piping systems for their superior strength, ability to withstand high pressure, and ease of welding. They are used to connect pipes or other components in a fluid or gas system, ensuring a secure and leak-proof connection. Raised Face Weld Neck Flanges (RF WN Flanges) feature a raised face that helps create a tight seal with the mating component (usually a pipe or valve), typically using a gasket in between.

Carbon Steel Flanges are a category of flanges made from carbon steel, a versatile and commonly used material in piping systems. These flanges are used to connect pipes, valves, pumps, and other equipment in a piping system and can be found in a wide range of industries including oil and gas, chemical processing, water treatment, power generation, and construction.

304 SS Blind Flanges are flanges made from 304 stainless steel, a widely used grade of stainless steel known for its excellent corrosion resistance, strength, and versatility. 304 stainless steel is primarily composed of 18% chromium and 8% nickel, giving it superior resistance to oxidation, corrosion, and chemical attack in a wide range of environments. These properties make 304 SS blind flanges a popular choice in many industrial applications.